Sunday, May 30, 2010

What is a Tractors Power Train

Systems Operation784C, 785C and 785C HAA Off-Highway Truck/Tractors Power TrainBasic diagram for the power train systemsThe power train is made up of four basic systems. The following systems are the four systems:* Power Train Electronic Control Module* Torque Converter* Transfer Gears and Transmission* Differential and Final DrivesThe four...
»»  read more

Tuesday, May 25, 2010

ECM for control engine governor and fuel injection type D10R

Diagram fuel injection and electronic governorThe electronic system consists of the following components: Electronic Control Module (ECM), Hydraulic Electronic Unit Injectors (HEUI), Injection Actuation Pressure Control Valve (IAPCV), wiring harness, switches and sensors. The ECM receives information from the sensors and the switches on...
»»  read more

Tuesday, May 11, 2010

Starting motor 50-MT

Starting motor 50-MTThe 50-MT series starting motor may be ordered in the following versions: 24 volt, 32 volt and 64 volt. See the chart in Specifications, "50-MT Series Starting Motor Coverage" for a list of part numbers for starting motors that are covered in this module.The starting motor is used in order to turn the engine flywheel quickly...
»»  read more

Friday, May 7, 2010

How to Calibrate Engine Pressure Sensor for CAT- D10R

Engine Pressure Sensor - CalibrateSystem Operation Description:The Electronic Control Module (ECM) attempts to perform an automatic calibration of all pressure sensors whenever the ECM is powered and the engine is OFF for at least five seconds. Cranking the engine during the first five seconds causes the ECM to abort the calibration attempt. Perform a manual calibration if a pressure sensor is replaced.During an automatic pressure...
»»  read more